Highly efficient water‐soluble visible light photoinitiators

The monoacylphosphineoxide (MAPO) salts Na‐TPO and Li‐TPO and the bisacylphosphineoxide (BAPO) salts BAPO‐ONa and BAPO‐OLi define an important and in the latter case a new class of water‐soluble photoinitiators (PIs) for radical polymerization. These compounds showed excellent water‐solubility of at least 29 g/L for Na‐TPO and up to 60 g/L for BAPO‐ONa in deionized water, thus exceeding the solubility of the state of the art PI for water‐based systems Irgacure 2959 ( I2959 ) 6‐ to 12‐fold. However, biocompatibility, storage stability, and reactivity were equally important to replace the state of the art compounds. Concerning these properties, the MAPO and BAPO salts were at least in the same range (biocompatibility, stability) or showed even better results (reactivity) and had the additional advantage of visible light initiation. Na‐TPO and Li‐TPO achieved double bond conversions of an aqueous solution of N‐acryloylmorpholine over 97% with broad band irradiation (320–500 nm), Li‐TPO showed additionally very good biocompatibility (LC₅₀ = 3.1 mmol/L) and BAPO‐OLi showed highest reactivity with visible light irradiation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 473–479     

Angle‐dependent light scattering by highly uniform colloidal rod‐shaped microparticles: Experiment and simulation

While extensive theoretical work has been devoted to analyzing scattering behavior for nonspherical particles, few experimental studies of the light‐scattering properties of such particles are available, largely because of the difficulty of synthesizing such particles with uniform geometries. Here we report the synthesis of highly uniform, volume‐equivalent rod‐shaped colloidal particles prepared from their commercial spherical counterparts, on which we performed light scattering experiments as a function of scattering angle for micro rods with varying aspect ratio and volume. These results were compared to values calculated using the T‐Matrix method. Good agreement with theoretical predictions was found for the experimentally measured scattering cross sections and the angular dependence of the scattering intensity. An increase in the forward scattering intensity is observed and predicted for particles with larger aspect ratios relative to their volume equivalent spheres, with only minor differences observed at both mid‐range and backscattering angles. Furthermore, the light scattering results for the rod‐shaped particles did not show the scattering fringes seen in scattering by the spheres, indicating that as three‐dimensional symmetry is broken, the associated Lorenz–Mie resonances are strongly attenuated. This observation also was predicted by theory. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1889–1895     

Motion Control of Micro‐/Nanomotors

As we progress towards employing self‐propelled micro‐/nanomotors in envisioned applications such as cargo delivery, environmental remediation, and therapeutic treatments, precise control of the micro‐/nanomotors direction and their speed is essential. In this Review, major emerging approaches utilized for the motion control of micro‐/nanomotors have been discussed, together with the lastest publications describing these approaches. Future studies could incorporate investigations on micro‐/nanomotors motion control in a real‐world environment in which matrix complexity might disrupt successful manipulation of these small‐scale devices.     

Benchmarking of Density Functionals for the Description of Optical Properties of Newly Synthesized π-Conjugated TADF Blue Emitters

Computational modeling of the optical characteristics of organic molecules with potential for thermally activated delayed fluorescence (TADF) may assist markedly the development of more efficient emitting materials for organic light-emitting diodes. Recent theoretical studies in this area employ mostly methods from density functional theory (DFT). In order to obtain accurate predictions within this approach, the choice of a proper functional is crucial. In the current study, we focus on testing the performance of a set of DFT functionals for estimation of the excitation and emission energy and the excited singlet-triplet energy gap of three newly synthesized compounds with capacity for TADF. The emitters are designed specifically to enable charge transfer by π-electron conjugation, at the same time possessing high-energy excited triplet states. The functionals chosen for testing are from various groups ranging from gradient-corrected through global hybrids to range-separated ones. The results show that the monitored optical properties are especially sensitive to how the long-range part of the exchange energy is treated within the functional. The accurate functional should also be able to provide well balanced distribution of the π-electrons among the molecular fragments. Global hybrids with moderate (less than 0.4) share of exact exchange (B3LYP, PBE0) and the meta-GGA HSE06 are outlined as the best performing methods for the systems under study. They can predict all important optical parameters correctly, both qualitatively and quantitatively.     

Visible light-driven acridone catalysis for atom transfer radical polymerization

Acridone as a new kind of visible light photocatalyst has been developed to catalyze metal free atom transfer radical polymerization (ATRP). The photocatalyst possess low excited state potential as can undergo an oxidative quenching pathway to initiate ATRP of vinyl monomers. Kinetic study and light on/off reaction demonstrate the “living”/controlled nature of the polymerization by light. Block copolymers can be achieved by using PMMA as macroinitiator to reinitiate polymerization of other vinyl monomers, which shows highly preserved Br chain-end functionality in the synthesized polymers. Moreover, the polymerization can be conducted under air atmosphere as most photocatalysts need anaerobic condition, which may give inspiration of further application of this kind of photocatalyst.     

Visible‐Light‐Driven Halogen Bond Donor Based Molecular Switches: From Reversible Unwinding to Handedness Inversion in Self‐Organized Soft Helical Superstructures

Visible‐light‐driven molecular switches endowing reversible modulation of the functionalities of self‐organized soft materials are currently highly sought after for fundamental scientific studies and technological applications. Reported herein are the design and synthesis of two novel halogen bond donor based chiral molecular switches that exhibit reversible photoisomerization upon exposure to visible light of different wavelengths. These chiral molecular switches induce photoresponsive helical superstructures, that is, cholesteric liquid crystals, when doped into the commercially available room‐temperature achiral liquid crystal host 5CB, which also acts as a halogen‐bond acceptor. The induced helical superstructure containing the molecular switch with terminal iodo atoms exhibits visible‐light‐driven reversible unwinding, that is, a cholesteric–nematic phase transition. Interestingly, the molecular switch with terminal bromo atoms confers reversible handedness inversion to the helical superstructure upon irradiation with visible light of different wavelengths. This visible‐light‐driven, reversible handedness inversion, enabled by a halogen bond donor molecular switch, is unprecedented.     

光纤中基于双布里渊增益线的受激布里渊散射快光

为了解决受激布里渊散射快光在高吸收区产生损耗的问题,通过分析普通单模光纤中双线泵浦产生的双布里渊增益线特性及在增益峰间实现脉冲的超光速传输理论,利用有限元法数值模拟了双布里渊增益线处受激布里渊散射引起的快光特性。结果表明,当频率分离因子大于0.596时,可以观察到双增益峰;当频率分离因子在1~5.25范围内时,两个泵浦波产生的双增益峰之间可以明显地产生快光;当频率分离因子为1.75时,在双布里渊增益线之间的最大时间提前可达25 ps。当频率分离因子为2.42时,三阶色散所对应的归一化色散长度为无穷大,三阶色散可以得到完全补偿;当频率分离因子大于2.464时,脉冲展宽因子趋近于1,可以实现无畸变传输,但时间提前量小于13.52 ps。本文的研究结论对于在布里渊增益区实现快光具有一定的理论意义,并对设计基于受激布里渊散射快光器件具有理论指导作用。     

OCS分子在128 nm附近的光解动力学研究：S(3PJ=2,1,0)、S(1D2)以及S(1S0)产物通道

本文利用时间切片离子成像技术对OCS分子进行了真空紫外波段的光解动力学研究. 在四个光解光波长(从129.32到126.08 nm)下测量了硫原子解离产物S(³P_J=2,1,0)、S(¹D₂)、S(¹S₀)的速度影像，并从中清晰地发现了四个主要的解离产物通道：S(³P_J=2,1,0)+CO(X¹Σ⁺)，S(³P_J=2,1,0)+CO(A³π)，S(¹D₂)+CO(X¹Σ⁺)和S(¹S₀)+CO(X¹Σ⁺). 在实验影像中，产物CO分子的部分振动态结构能够得到分辨. 实验还获取解离产物总平动能谱，产物分支比和角分布. 对实验结果进行分析显示除绝热解离通道S(³P_J=2,1,0)+CO(A³π)之外，在其他三个产物通道中非绝热效应都起到非常重要的作用.